SN95 14″ GT500 Retrofit Brake Kit Installation


1) Jack up car, remove front wheels.

2) Remove stock caliper and rotor.

3) Install bracket to rear of spindle at stock caliper location using two M12 flange bolts and two M12 flange nuts. Apply Loctite thread locker

4) Install rotor

5) Install caliper on bracket using the provided m12 bolts and caliper spacers. Apply loctite.

6) Reinstall pads, wheels, etc.

Posted in Uncategorized

Leave a Reply

Your email address will not be published. Required fields are marked *